Zebra charging station, 5 slots

Zebra 5-Slot Charging Cradle

A flat battery on a barcode scanner at the wrong moment stops work. Whether you run a shop floor, a stockroom, or a retail floor with a small team, this Zebra charging cradle charges five devices at once — so the next shift picks up ready-to-go scanners, not ones that need ten minutes on a cable first.

Compatible devices

This cradle is designed for the following Zebra models:

• ·TC70
• ·TC72
• ·TC75
• ·TC77

Before ordering, check that your team is using one of these models. The fit is specific to Zebra's own hardware, so the connection sits firmly and charging is reliable every time.

What you need to order separately

The cradle ships without the power components — you will need to add these:

• ·Power supply
• ·DC cable
• ·Power cord (C13 connector)

All three are available from Vaivatta. Ask for a quote on the same order and we will make sure you have everything you need from day one.

What this means day to day

Five slots is enough for most small teams — every scanner in the building fits in one cradle, in one place. No one spends the first ten minutes of a shift hunting for a charged device or untangling cables from a drawer.

Leave the scanners in the cradle overnight and the morning team starts with full batteries. The cradle stays in the same spot, the devices go back to the same spot — and that consistency alone removes a small but real source of daily friction.

Getting set up

There is nothing complicated here. Place the cradle on a flat surface, connect it to mains power via the accessories above, and slot in the devices. If you are not sure which power components match your setup, or you want help getting everything connected, Vaivatta's support team can walk you through it.

Get in touch and we will confirm you have the right parts before anything ships.

Warranty: 12 months (manufacturer). Country of origin: Vietnam.